TL 10 / TL 15 – Wall Cladding Tile
TL 10 / TL 15 – Wall Cladding Tile
From Waste to Surface
Silica Plastic Block technology brings together waste plastic and industrial discards to create useful, durable building products.
Codes & Sizes
TL 10 – 100 × 100 mm, thickness 5 / 10 mm (TL10-5, TL10-10)
TL 15 – 150 × 150 mm, thickness 5 / 10 mm (TL15-5, TL15-10)
Designed for vertical wall cladding. For floors and larger wall areas, see TL 33 (330 × 330 mm).
Material
Made from 100% waste resources: 30–50% waste plastic + 50–70% industrial discard.
Uses low-value mixed plastic, including MLP (wrappers), along with foundry sand/dust, fly ash, bottom ash and similar inert discards.
Environmental Impact
Every 100 g of SPB material can incorporate approximately 15 discarded plastic bags/wrappers, turning difficult-to-recycle waste into a useful surface material.
Quality
Hydraulically compressed for consistent strength, density and texture. Each tile is individually produced, giving every piece a unique character and texture.
Properties
Water Resistant | Durable | High Strength | Lightweight | Recyclable
At the end of its useful life, the tile can be recycled at SPB Centres.
Waste Plastic + Industrial Discard → SPB → Wall Tile → Circular Resource
Price per sq ft (incl. GST)
TL10-5 / TL15-5 (5 mm): Rs 56 per sq ft
TL10-10 / TL15-10 (10 mm): Rs 111 per sq ft
Based on approx. 9.3 pieces per sq ft (TL 10) or 4.1 pieces per sq ft (TL 15). Material only, ex-Anand; freight as applicable for other locations.
Pricing
Inclusive of 18% GST | Ex-Anand | Unpacked
Note: Weights are indicative and vary with material composition.
